Havis DS-PAN-211 - User Manual

Owner’s Manual
Havis Rugged Mobile Docking Station
For Panasonic CF-19 Toughbook
DS-PAN-210-220-SERIES_OMN_3-12
www.havis.com
1-800-524-9900
DS-PAN-211
DS-PAN-211-2
DS-PAN-212
DS-PAN-212-2
DS-PAN-213 DS-PAN-214
DS-PAN-214-2
DS-PAN-221
DS-PAN-221-2
Related Products
Havis offers a wide variety of accessory products specically for use
with the DS-PAN-210 Series and DS-PAN-220 Series Docking Station.
For more information or to order please visit www.havis.com.
DS-DA-405
Screen Stiffener
Secure your laptop screen to prevent excess wear and reduce
vibration while in use.
LPS-101
90W Power Supply
External power supply and cable for Panasonic CF-19 Toughbooks
with cigarette lighter adaptor.
DS-DA-102
USB Powered Light
Soft red LED light illuminates the laptop keyboard for night viewing.
DS-DA-213
Card Reader Mounting Bracket
Mount an E-Seek Model 250 card reader to the side of the Docking Station.
(Bracket can be customized for other Card Reader Models)
DS-DA-214
Side Cover Brackets
Strong steel and tamper-proof screws provide additional security
to prevent hard drive theft.
DS-DA-210
Cable Cover Bracket
Protect cable connections at rear of Docking Station.
DS-PAN-210 Series/220 Series
Havis, Inc.
75 Jacksonville Road, PO Box 2099
Warminster, PA 18974
47801 Anchor Court
Plymouth, MI 48170
www.havis.com 1-800-524-9900

Summary

Before Beginning

Safety Warnings and Cautions

Key safety warnings and installation cautions including airbag zones, driving, and connector access.

Model Compatibility Notice

Information on specific docking station models for CF-19 Mark level computers.

Precautions

Handling and Storage Precautions

Guidelines for safe handling, storage, and environmental conditions for the docking station.

Specifications

Technical Specifications

Details power input, dimensions, weight, and operating/storage environments.

CE Marking Declaration

Declaration of conformity with EU directives and harmonized standards for CE marking.

Parts Included

Docking Station Components

Identifies the main parts of the docking station and its components.

Hardware Kit Contents

Lists the items included in the hardware kit and required tools for installation.

Port Replication Capability

Port Identification Diagram

Diagram showing various ports on the docking station, including Ethernet, USB, Serial, VGA.

Installation

Mounting Bracket to Motion Device

Steps to attach the mounting bracket to a motion device using specific screws.

Docking Station to Mounting Bracket

Procedure for securing the docking station to the mounted bracket.

Cable Management

Cable Strain Relief and Routing

Using zip ties to strain relieve cables at the rear and gather them on the underside.

Cable Management (continued)

Service Loop for Motion

Creating a service loop for cable tension relief and intended motion.

Securing Cables to Mounting System

Tying off cables to a stationary part of the mounting system.

Operation - Docking

Prepare Docking Station for Use

Ensure the docking station is unlatched by positioning the latch handle to 'UNDOCK'.

Load and Connect Computer

Align front hooks, lower back onto connector, and secure with latch handle.

Operation - Docking (continued)

Secure Computer and Check Indicator

Lock the station for theft deterrence and interpret the dock indicator LED status.

Operation - Undocking

Unlock and Remove Computer

Unlock the station, unlatch the handle, and lift the computer out from the rear.

Optional Power Supply Installation

Prepare and Mount Power Supply

Attach the power supply brick to the docking station using provided screws and washers.

Connect Power Output Cable

Route the power supply output cable and secure the connector to the docking station's power input.

Optional Screen Stiffener Installation

Install Screen Stiffener Bracket

Align and secure the screen stiffener bracket to the docking station using screws.

Optional USB Laptop Lighting Installation

Install USB Laptop Lighting

Attach the USB light assembly to the screen stiffener and connect to a USB port.

Related Products

Accessory Product Overview

Lists and describes accessories available for the DS-PAN-210/220 Series docking stations.

Havis DS-PAN-211 Specifications

General

Microphone in	Yes
Serial ports quantity	2
USB 2.0 ports quantity	4
Connectivity technology	Docking
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Certification	MIL-STD 810G 514.5
Compatibility	Toughbook 19 MK4
Product color	Silver
Housing material	Acrylonitrile butadiene styrene (ABS), Aluminium
Brand compatibility	Panasonic
Card reader integrated	No
Package weight	2100 g

Weight and Dimensions

Depth	279 mm
Width	277 mm
Weight	1800 g
Height (front)	82 mm