To Next PageTo Next Page
Need help?Do you have a question about the Hawk X Series and is the answer not in the manual?
General| Brand | Hawk |
|---|---|
| Model | X Series |
| Category | Security System |
| Language | English |
Learn to test wire polarity (positive, negative) using a multimeter for correct connections.
Detailed testing procedures for ignition, accessory, and starter wires.
Overview of alarm wiring, suggesting routing alongside the motorcycle loom and soldering joints.
Connects WHITE/BLACK and BLACK/WHITE wires to the push start switch feed wire via cutting.
Connects WHITE/BLACK and GREY wires to the ignition disable wire on two-stroke engines.
Connects the YELLOW/RED wire to the output of the start switch or start relay for remote starting.
