To arm the alarm system, turn the ignition switch OFF,
press the button, indicators will flash once; with
single audible bleep LED starts to flash and LCD remote
fob will bleep once, the alarm system will enter into
the arming status after 5 seconds. LCD remote fob will
show icon on the screen. If motorcycle is slightly
moved, the alarm will chirp and the indicator will flash lights 5 times, LCD
remote fob hammer icon will flash and vibrate. If it’s moved hard after 10
seconds then full reaction will occur and sound for 30 seconds. Engine will
be completely immobilised and can not be driven away.
Press the button twice, the lights will flash once LCD
remote fob will bleep with icon appear on LCD screen
and the system will be armed.
To disarm the alarm system, press the button,
indicators flash twice with two audible bleeps. LCD
remote will bleep twice and icon will appear on the
screen to confirm.
Note: In silent arm status, the siren will not bleep.
To Next Page
Loading...