Wireless LAN Access Point Connection
Chapter 2 Wireless LAN Access Point
Connection
1. Locate an optimum location for the Wireless Access Point.
The best location for your Access Point is usually at the center of your
wireless network, with line of sight to all of your mobile computers. A
higher location is also preferable. (i.e. the second story of a house versus
the first level)
2. Connect the Wireless LAN Access Point to your router, hub or switch.
Connect one end of included Ethernet cable to the Access Point’s LAN
Port and connect the other end of the cable to a switch, a router or a hub.
The Access Point will then be connected to your existed wired LAN
Network.
3. Connect the DC Power Adapter to the Wireless LAN Access Point’s
Power Socket.
Only use the power adapter supplied with the Access Point. Using a
different adapter may damage the product.
The Hardware Installation is complete.
To Next Page
Loading...
Need help?
General
