9
7. Lay the other Cabinet
P on the floor and
connect the last Profile
A by sliding the
cabinet into the cut-outs of the connectors.
8. Lift the cabinet and profile and slide into
the connectors of the middle profile.
9. Slide the rest of the shelves into the
connectors. Make sure the connectors on
the back of the top shelf go into the
designated cut-outs in the wall bracket.
10. Finally, you can adjust the height of the
feet of your shelving by first loosening the
nut right under the profile. Use the provided
Wrench
Q . Then turn the glider to bring it
up or down. Tigthen the nut when you have
reached the desired hight.
8
1514
To Next Page
