What to do if my Hayter Harrier 41 Lawn Mower will not self propel?
If your Hayter Lawn Mower will not self propel, the clutch might be out of adjustment, so adjust the clutch cable. Alternatively, the drive belt might be damaged, so replace it.
What to do if Hayter Harrier 41 Lawn Mower engine runs then stops?
If your Hayter Lawn Mower engine runs then stops, it might be experiencing fuel starvation. Try filling the fuel tank or turning the fuel shutoff valve to the 'ON' position. Also, the fuel cap vent might be blocked, so try cleaning it.
What to do if my Hayter Harrier 41 is hard to push?
If your Hayter Lawn Mower is hard to push, it could be because the cut height is too low or the wheels/roller are damaged. Try increasing the cut height and inspect and replace the wheels/roller if needed.
What to do if the discharge chute blocks on my Hayter Harrier 41 Lawn Mower?
If the discharge chute of your Hayter Lawn Mower blocks, it may be due to several reasons. The grass might be wet, the cut height could be too low, the grassbag might be full, airflow through the grassbag could be restricted, or the engine speed might be too slow. Here's what to do: * Mow dry grass. * Increase the cut height. * Empty the grassbag. * Clean the grassbag. * Set the throttle to the fast position.
General| Cutting Width | 41 cm |
|---|---|
| Engine Type | Petrol |
| Drive System | Self-propelled |
| Cutting Height | 13 - 60 mm |
| Deck Material | Aluminium |
| Starting System | Recoil |
| Engine | Briggs & Stratton |
| Roller | Yes |
| Grass Collector Capacity | 45 L |
| Wheel Size | 7 inch |
Guidance on proper training and familiarization with mower controls.
Pre-operation checks and safety measures before using the mower.
Safe operating procedures and precautions to follow during mowing.
Explanation and location of various warning and information decals on the mower.
Identification of components for the general assembly of the mower.
Instructions for unpacking and assembling the new mower.
Essential checks and preparations before starting the engine.
Detailed steps for starting the mower's engine using different methods.
Procedures for safely stopping the mower's engine, including emergency stops.
How to adjust the cutting height for optimal mowing.
Instructions for moving the mower forwards and in reverse.
Techniques for making wide and tight turns with the mower.
Guidance on attaching, using, and emptying the grassbag.
Instructions for mowing without collecting grass clippings.
Tips for mowing areas with heavy grass growth.
Procedure for moving the mower over surfaces other than grass.
Information and warnings regarding the operation of the cutterbar.
Advice on effective mowing techniques and lawn care.
Essential engine maintenance including oil, air, spark plug, and carburettor.
Procedure for adjusting the throttle cable for optimal performance.
Information on carburettor adjustments, recommended for dealers.
Instructions for checking, draining, and changing engine oil.
Steps for cleaning or replacing the air cleaner cartridge.
Guidance on checking and replacing the spark plug.
General cleaning of engine, grassbag, and deck housing.
Regular checks to ensure all nuts and bolts are tight.
Lubrication points and schedule for the mower's moving parts.
Procedure for adjusting the clutch cable on Auto Drive models.
Procedures for cutterbar care, sharpening, and safety.
Instructions for charging the battery on electric start models.
Initial maintenance steps required after the first 5 hours of operation.
Daily or every 5-hour checks and cleaning procedures.
Maintenance tasks to be performed every 25 hours or seasonally.
Maintenance tasks to be performed every 50 hours or seasonally.
Maintenance tasks to be performed every 100 hours or seasonally.
Diagnosing and resolving issues when the engine fails to turn over.
Identifying causes and solutions for engine smoking issues.
Troubleshooting why the engine starts and then stops.
Common reasons and remedies for the engine failing to start.
Diagnosing and fixing issues causing the engine to run unevenly.
Addressing causes of excessive vibration in the engine.
Troubleshooting causes for an uneven cut pattern.
Resolving blockages in the grass discharge chute.
Identifying reasons why the mower is difficult to push.
Troubleshooting why the mower's self-propel function is not working.
Diagnosing and fixing issues leading to poor grass collection.
To Next Page