EasyManua.ls Logo

Hayward AquaRite AQR15CUL User Manual

Hayward AquaRite AQR15CUL
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AquaRite
Electronic Chlorine Generator
®
AQR15CUL
AQR9CUL
AQR3CUL
AQR15XLCUL
AQR9XLCUL
AQR3XLCUL
Hayward Pool Products
620 Division Street, Elizabeth NJ 07207
www.hayward-pool.ca
092540 RevA
Owner’s Manual
Contents
Operation..............................2
Installation.......................11
Troubleshooting.................. 15
Warranty..............................18
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
Question and Answer IconNeed help?

Do you have a question about the Hayward AquaRite AQR15CUL and is the answer not in the manual?

Hayward AquaRite AQR15CUL Specifications

General IconGeneral
BrandHayward
ModelAquaRite AQR15CUL
CategoryPortable Generator
LanguageEnglish

Summary

Important Safety Instructions

Operation Overview

Model Selection

Select the proper model for your pool based on its size and capacity.

Water Chemistry Management

Saturation Index

Determines pool water balance using pH, temperature, calcium, and alkalinity.

Salt Level Management

Recommended Salt Type

Specifies the type of sodium chloride salt to use for the AquaRite.

Adding and Removing Salt

Provides instructions on how to add or remove salt from the pool.

System Controls

Main Switch and Indicator LEDs

Details the functions of the main switch and various indicator LEDs on the control panel.

Advanced Settings and Displays

Turbo Cell Type Configuration

Procedure to set the AquaRite for the specific chlorinator cell model used.

Output and Display Settings

Explains the 'Desired Output %' knob, Salt Display, Temperature Display, and Instant Salinity.

Operation Details

Adjusting Chlorine Output

Discusses factors affecting chlorine generation and how to adjust settings.

Automation Control Integration

Explains how AquaRite integrates with external pool automation systems.

Maintaining the AquaRite System

Servicing and Cleaning the Cell

Provides instructions for inspecting and cleaning the AquaRite electrolytic cell.

Winterizing and Spring Start-up

Covers procedures for preparing the system for winter and starting it in spring.

Installation Guide

Preparing Pool/Spa Water

Details chemical balancing requirements before AquaRite installation.

Mounting the AquaRite Control

Guidelines for physically mounting the AquaRite control enclosure.

Plumbing and Wiring

Flow Switch and Electrolytic Cell Plumbing

Instructions for plumbing the flow switch and electrolytic cell into the return line.

Electrical Wiring Requirements

Covers basic wiring principles, grounding, and bonding for the AquaRite.

Electrical Connections

Input Power and Voltage Configuration

Details wiring for 120VAC and 240VAC, including jumper settings.

Bonding and Cell/Switch Connections

Explains bonding lugs and connecting the electrolytic cell and flow switch.

Optional Controls Integration

Connecting External Automation Systems

Wiring instructions for integrating Hayward, Pentair, and Polaris controls.

Troubleshooting Guide

Diagnostic Displays and Codes

Lists information available through the diagnostic button and LCD display.

Common Problems and LED Indicators

Addresses common issues like 'Power' LED, 'Generating' LED, and 'No Flow' LED.

Troubleshooting Common Issues

LED Status and Solutions

Explains 'Check Salt', 'High Salt', and 'Inspect Cell' LED indicators and solutions.

Causes of Low or No Chlorine Residual

Lists various factors that can lead to insufficient free chlorine levels.

Pool Maintenance Requirements

Water Testing and Adjustments Schedule

Summarizes required water tests and chemical adjustments for optimal performance.

Limited Warranty Information

Warranty Terms and Exclusions

Details the warranty period, coverage, and specific exclusions for the AquaRite system.

Related product manuals