Hayward CAT-2000 User Manual

\
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
CAT 2000
Automated Controller
Owner’s Manual
092430A RevF
Contents
Introduction............................................3
Installation..............................................5
Pool Chemistry........................................9
Conguration..........................................9
Display Functions...................................17
System Maintenance............................20
Troubleshooting....................................21
Warranty...............................................26
®
CAT-2000
CAT-2000-AU
CAT-PP2000
CAT-PP2000-AU
CAT-OEM2000
Hayward Industries
400 Connell Drive, Suite 6100
Berkeley Heights, NJ 07922
Phone: (908) 355-7995
www.hayward.com

Hayward CAT-2000 Specifications

General

Brand	Hayward
Model	CAT-2000
Category	Controller
Language	English

Summary

Important Safety Instructions

Foreword

Introduction

Installation

Installation Procedure With Flow Cell

Steps for installing the CAT 2000 with a flow cell.

Installation With Bypass Line

Pool Chemistry

Configuration

Basic Configuration Options

Setting up acid/base feed modes and calibration.

Setpoint Adjustment

Adjusting pH and ORP setpoints for desired control levels.

Feed Mode Selections

Options for manual, auto, and proportional control of pH and ORP feed.

Advanced Settings and Functions

Switch and Keypad Functions

Description of controller buttons and their functions.

Advanced Setup Mode

Guide to accessing and navigating advanced programming menus.

Configuration Parameters

Detailed settings for pH and ORP proportional feed, overfeed, and alarms.

Display and Indicator Functions

pH Display and Indicators

Explains pH channel LEDs, digital display, and modes.

ORP Display and Indicators

Explains ORP channel LEDs, digital display, and modes.

Indicator Designations Summary

Table summarizing all indicator designations and their functions.

System Maintenance

Water and Sensor Maintenance

Procedures for cleaning and maintaining sensors and water chemistry.

Controller and Winter Storage

Guidelines for storing the controller unit and protecting it from freezing.

Troubleshooting

Power and Alarm Issues

Steps to resolve issues with no power or active alarms.

Feed and Reading Problems

Solutions for feeder activation, calibration, and reading inconsistencies.

Technical Specifications

Warranty Information