To Next PageTo Next Page
Need help?Do you have a question about the Hayward HCC 2000 and is the answer not in the manual?
General| Brand | Hayward |
|---|---|
| Model | HCC 2000 |
| Category | Controller |
| Language | English |
Key safety warnings and recommendations for operating the controller and related equipment.
Explains the advantages of automated chemical control and compares manual vs. automated methods.
Lists all components included in the HCC 2000 controller package.
Lists the necessary tools for installing the HCC 2000 controller.
Details the step-by-step process for physically installing the HCC 2000 controller.
Identifies buttons and displays on the HCC 2000 controller unit for operation.
Explains fundamental settings like acid/base feed mode selection for pH control.
Guides on calibrating and adjusting the pH setpoint for water control.
Details how to adjust the ORP setpoint to maintain desired sanitizer levels.
Describes manual and automatic control options for pH and ORP chemical feeders.
Introduces advanced programming features usually set during dealer setup.
Explains the display at power-on and how to enter advanced setup modes.
Configures pH feed mode, pH priority, and pH interlock features.
Sets pH proportional feed and high alarm limit for pH monitoring.
Configures ORP proportional feed and overfeed timer settings.
Configures pH overfeed timer limits and low alarm point for pH.
Covers demo mode, audible alarm, and serial interface settings.
Configures ORP overfeed timer and low/high alarm limits for ORP.
Configures online communication and printer output for data logging.
Explains pH feed, alarm, digital display, and mode indicators on the controller.
Explains ORP feed, alarm, digital display, and mode indicators on the controller.
Provides a table summarizing all indicator designations and their functions.
Guidelines for testing, recording water chemistry, and periodic pH calibration.
Instructions for cleaning and maintaining pH and ORP sensors for optimal performance.
Information on replacing sensors and proper storage to prevent drying.
Guidance on controller storage, protection from ESD, and winterization.
Addresses issues like no lights, alarms, illogical readings, and feeder activation problems.
Solutions for inconsistent readings, continuous feeding, and over/under shooting setpoints.
Lists display ranges, setpoint ranges, default settings, and mode selections.
Details safety systems, sensor casing, junction type, and output signal requirements.
Covers power input, output specifications, and optional equipment like feed pumps.
Outlines the HCC 2000 warranty period, coverage, and how to submit claims.
