R
Robert BensonAug 3, 2025
Why is LED 2 blinking on my Hayward ColorLogic LKCUS1100 Controller?
- DderricksmithAug 3, 2025
If the Hayward Controller is overloaded, LED 2 will blink.
To Next PageTo Next PageWhy is LED 2 blinking on my Hayward ColorLogic LKCUS1100 Controller?
If the Hayward Controller is overloaded, LED 2 will blink.
What does it mean when LED 3 is blinking on my Hayward Controller?
If the Hayward Controller is busy, LED 3 will blink.
What does it mean if LED 4 is blinking on my Hayward ColorLogic LKCUS1100 Controller?
If there is a recurring schedule issue with your Hayward Controller, LED 4 will blink.
What does it mean if LED 5 is blinking on my Hayward Controller?
If there is a one-time countdown issue with your Hayward Controller, LED 5 will blink.
What does it mean when LED 1 is blinking on my Hayward ColorLogic LKCUS1100 Controller?
If the Hayward Controller has the same selection, LED 1 will blink.
General| Model | LKCUS1100 |
|---|---|
| Category | Controller |
| Manufacturer | Hayward |
| Compatibility | ColorLogic LED Pool Lights |
| Voltage | 12V |
| Warranty | 1 Year |
| Type | ColorLogic LED Pool Light Controller |
Essential safety precautions and warnings for installing and using the ColorLogic Light Controller.
Guidance on selecting a suitable location for the controller, including indoor/outdoor use.
Step-by-step instructions and diagram for connecting the controller's wiring.
Explains the function of each button and the center knob for controlling lights.
Explanation of LED blinking patterns and their corresponding error or status conditions.
