Need help?Do you have a question about the Hayward HP50CLEE and is the answer not in the manual?
Details performance metrics like input power, current, and water flow.
Provides physical measurements of the heat pump unit.
Illustrates the system setup and plumbing connections.
Guides on optimal placement for fresh air and accessibility.
Advises on the optimal distance from the pool for efficiency.
Details plumbing requirements and connections for the unit.
Explains electrical hookup, grounding, and breaker requirements.
Provides step-by-step instructions for the first operational start.
Describes the buttons and display of the unit's control panel.
Explains how to operate the unit via the wire controller, including turning on/off and setting temperature.
Details how to switch between cooling, heating, and auto modes.
Explains how to set and view temperatures, including unit conversion.
Describes how to lock and unlock the controller to prevent mis-operation.
Explains error codes displayed on the controller screen.
Lists default and adjustable parameters for the unit.
Provides a detailed table of faults, reasons, and solutions.
Lists fault codes related to the frequency conversion board.
Provides guidelines for regular maintenance and cleaning of the unit.
Details steps to prepare the unit for winter to prevent freeze damage.
Illustrates PCB wiring connections and their definitions.
Details the meaning of various terminal symbols and connections.
Provides detailed electrical wiring diagrams for unit models.
Shows a breakdown of the unit's components for HP50CLEE.
Lists all available spare parts with codes, names, and specifications.
Shows a breakdown of the unit's components for HP65CLEE.
Shows a breakdown of the unit's components for HP75CLEE.
Highlights critical safety precautions and warnings for operation and installation.
Provides specifications for electrical cables based on unit current.
Details the terms and conditions of the manufacturer's limited warranty.
To Next Page
General