Need help?Do you have a question about the Hayward HP50A1 and is the answer not in the manual?
General| Model | HP50A1 |
|---|---|
| Category | Heat Pump |
| Heating Capacity | 50, 000 BTU/hr |
| Voltage | 208/230V |
| Phase | Single |
| Hertz | 60Hz |
| Refrigerant | R-410A |
| Compressor Type | Scroll |
| COP (Heating) | 5.0 |
Provides performance data including heating capacity, power input, current, and supply voltage.
Illustrates the water system connection including pump, filter, chlorinator, and heat pump.
Provides three essential steps for the initial start-up procedure of the unit.
Covers titanium heat exchanger, pipe types, connection location, and condensation management.
Details power supply matching, grounding, and safety precautions for electrical hookup.
Step-by-step guide for starting the unit after installation, including pump and flow checks.
Describes how to view and adjust the desired water temperature set point with 0.5°C precision.
Annual tasks to ensure longevity: cleaning coil, checking drains, connections, and condenser sealing.
Steps for preparing the unit for winter: turning off, draining, closing valves, and covering.
To Next Page