Hayward Saline C® 6.0 User Manual

USE ONLY HAYWARD GENUINE REPLACEMENT PARTSUSE ONLY HAYWARD GENUINE REPLACEMENT PARTS
ISHCSC60 RevE
Hayward Commercial Pool Products
10101 Molecular Drive, Suite 200
Rockville, MD 20850
Phone: (800) 657-2287
www.haywardcommercialpool.com
Owner’s Manual
HCSC60
Contents
Description.....................3
Installation.....................4
Operation........................7
Maintenance...................8
Parts Guide.....................9
Warranty........................11
Commercial Salt Chlorine Generator
Saline C 6.0
TM
IMPORTANT SAFETY INSTRUCTIONS
Basic safety precautions should always be followed, including the following: Failure to follow instructions can
cause severe injury and/or death.
This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for
one of the following signal words and be alert to the potential for personal injury.
WARNING warns about hazards that could cause serious personal injury, death or major property dam-
age and if ignored presents a potential hazard.
CAUTION warns about hazards that will or can cause minor or moderate personal injury and/or property
damage and if ignored presents a potential hazard. It can also make consumers aware of actions that are
unpredictable and unsafe.
The NOTICE label indicates special instructions that are important but not related to hazards.
CM
C
L
I
S
T
E
D
I
N
T
E
R
T
E
K
US
C
3101970
Conforms to UL 1081 and
CSA, C22.2 #218.1

Hayward Saline C® 6.0 Specifications

General

Category	Inverter
Output Power	6.0kW
Input Frequency	50/60Hz
Protection Level	IP65
Model	Saline C® 6.0
Efficiency	>95%
Operating Temperature	-10°C

Summary

IMPORTANT SAFETY INSTRUCTIONS

General Safety Precautions

Basic safety precautions, signal words (WARNING, CAUTION, NOTICE).

Specific Hazard Warnings

Electrical shock, chemical, pressure, and entrapment hazards and precautions.

DESCRIPTION & SPECIFICATIONS

System Overview and Components

General information, electrolytic cell, power supply, electrical requirements.

Technical Specifications and Sizing

Rated specs, flow rates, electrical needs, and sizing guidelines.

INSTALLATION

Preparation and Power Supply Installation

Unpacking, storage, planning, and mounting the power supply.

System Wiring and Plumbing

Electrical connections, safety interlocks, and plumbing diagrams.

Cell Housing and Flow Switch Installation

Details for cell housing, flow switch, and cell wiring setup.

OPERATION

Water Preparation and System Startup

Procedures for preparing water and starting the system.

System Operation and Controls

How the system operates, output adjustment, and low salt alarm.

MAINTENANCE & WINTERIZATION

Routine Maintenance Procedures

Salt checks, cell cleaning, flow switch testing, and vessel draining.

Winterization Procedure

Steps to prepare the system for cold weather to prevent freezing.

PARTS GUIDE & WARRANTY

Replacement Parts List

Identification of part numbers and descriptions for the system.

Product Warranty and Registration

Details on the limited warranty, exclusions, and product registration process.

DETAILED SAFETY WARNINGS

Suction Entrapment Hazards

Detailed explanation of suction hazards and preventative measures.

Pressure, Separation & Electrical Safety

Warnings related to system pressure, component separation, and electrical safety.