Need help?Do you have a question about the Hazet 9212SPC-1 and is the answer not in the manual?
General| Operating pressure | 6.3 bar |
|---|---|
| Hose diameter (recommended) | 10 mm |
| Type | Pneumatic impact wrench |
| Output square drive | 1/2 inch |
| Air inlet thread | 1/4 inch |
| Material | Metal |
Details on symbols indicating advice, important specifications, dangerous conditions, and qualified personnel requirements.
Recommends wearing gloves, safety glasses, hearing protection, face mask, and suitable clothing.
Advises keeping tools from children, using proper sockets, and observing reaction torque.
Covers avoiding explosive atmospheres, pointing tools at others, and stopping for direction changes.
Details on setting torque stages and the necessity of using a separate torque wrench for checks.
Instructions on how to attach and detach the battery, including LED indicator functions.
To Next Page
