HB Products SA96DX-I/Ex

To Next Page

Ex Short_Longstroke cULus Manual responsible: Michael Elstrom page 1 Ver. 10-

ISO 9001 : 2000

Explosion Protection

Intrinsic Safety acc. To UL

Long & Shortstroke Position Sensor

Type SA96DX-I/Ex & SLCD-M1/__Ex

cULus approved

Combined Temp. plate for cULus

Longstroke: SA96DX-I/Ex

Shortstroke: SLCD-M1/_Ex

Important information:

Keep updated by reading our “Index of history” (last page of this manual)

Main Page

Need help?

Do you have a question about the HB Products SA96DX-I/Ex and is the answer not in the manual?

Summary

Declaration of Conformity

Control Drawing

Installation Example

Longstroke SA96 DX-I;Ex Installation

Illustrates the installation setup for the Longstroke SA96DX-I/Ex sensor, including wiring and component details.

Shortstroke SLCD-M1;xx;Ex Installation

Shows the installation diagram for the Shortstroke SLCD-M1/xx/Ex sensor, covering wiring and component identification.

Calibration Procedure

Shortstroke SLCD-M1;xx;Ex Calibration Steps

Detailed steps for calibrating the SLCD-M1/xx/Ex transmitter, including LED indicators and slide valve operation.

Longstroke SA96 DX-I;Ex Mounting and Calibration

Longstroke SA96 DX-I;Ex Calibration Steps

Instructions for calibrating the Longstroke SA96DX-I/Ex transmitter, covering voltage application and button presses.

Index of History