HBD PV500 Series - User Manual

PV500 Series solar pump Inverter
User's manual
Ver：2.00

Summary

Safety Precautions

Safety Definition

Defines 'Danger', 'Warning', and 'Qualified electricians' for safety context.

Warning Symbols

Lists and explains warning symbols used in the manual for safety.

Safety Guidelines

Provides essential safety guidelines for operating the inverter.

Delivery and Installation Safety

Commissioning and Running Safety

Maintenance and Replacement Safety

Scrap Treatment Safety

Installation Guidelines

Keypad Operation Procedure

Keypad Introduction

Displayed State of Stopping Parameters

Displayed State of Running Parameters

Displayed State of Faults

Displayed State of Function Codes Editing

Keypad Operation

Modify Function Codes

Set Inverter Password

Watch Inverter State via Function Codes

Commissioning Guidelines

Inspection Before Operation

Lists checks to perform before powering on the inverter for the first time.

Trial Run

Instructions for conducting a trial run of the inverter and pump.

Parameter Settings

Guides on how to set parameters after initial power-on.

Advanced Settings

Introduces advanced settings for fine-tuning the inverter.

PI Adjustment to Water Yield

Details how to adjust PI parameters for water yield optimization.

Special Settings for Single Phase Motors

Provides specific configuration advice for single-phase motors.

Function Parameters

Common Function Parameters for Solar Pumping Inverter Control

Lists and explains common parameters for controlling the solar pumping inverter.

Parameters of Special Functions

Details parameters related to special functions of the inverter.

Fault Diagnosis and Solution

HBD PV500 Series Specifications

General

Rated Power	500W
Peak Power	1000W
Cooling	Fan Cooling
Input Voltage	12V DC
Output Voltage	220V AC
Output Frequency	50Hz/60Hz
Efficiency	≥90%
Protection Features	Overload, Short Circuit
Input Voltage Range	10-15V DC (for 12V model)