ON DELIVERY
Please check if the product arrives (1) without damage and (2) complete – see the parts list
or packing list. If you notice the case/ crate has sustained real damage contact the
haulage company and (if possible) do not accept your delivery. In case your product arrives
in damaged condition (whatever the cause) but the packing case is intact, contact HBM
Machines. In case of doubt, ring HBM Machines. In case of obvious damage, always take
photographs – a proof of your statement about damage may be required.
IN CASE OF COMPLAINTS RE DAMAGE, ACT WITH DUE DILIGENCE!
In case a claim is made after too long a time interval, this will not be entertained (unless
you can provide a reasonable explanation for the delay).
UNPACKING AND ASSEMBLY (also read HOISTING and LIFTING, below))
1. Read the Instructions for Use in full before assembling, commissioning and using this
product. If you have any question after having read these instructions, please ask HBM
Machines for advice. Then follow the instructions.
2. Please note that Instructions for Use contain sufficient information about the product,
enabling normal operation according to its intended use.
3. Please note that products are meant to be used by experienced users only. In case you
fail to meet this requirement, please get educated or acquire more experience before
using our product.
4. Please note – the user/ owner of this product is fully responsible for any damage or
accident caused by a lack of knowledge or experience in the use of such a product!
5. This product should be installed in a place free from shocks, vibrations etc. Keep the
installation site clean, well ventilated (use a dust extractor if necessary) and well lit.
6. Follow the rules for assembly. Keep the instructions for use near the site where the
product is used, which makes consulting them easier.
7. After a product has been installed in its intended site, please check if measures taken/
adjustments made, intended for transport, lifting and hoisting only, must be undone or
To Next Page
Loading...