HBM 300 - Safety Measures

SAFETY MEASURES
1. Only well trained personnel is allowed to operate this machine. In case you are unfamiliar with this type of
machine, please get educated before you start operating it!
2. All safety shields must remain intact and in place. Removal of safety shields is strictly prohibited. You are
responsible for keeping all safety measures in proper working condition!
3. DO NOT STAND UNDER A SUSPENDED LOAD. KEEP HANDS AWAY FROM MOVING PARTS! Do not lift
unstable loads. DO NOT use the lift to permanently support a load. Shift the load to a rigid, safe and fixed means of
support.
4. You must prevent the machine from being inadvertently switched on.
5. Never force a machine. Never exceed the rated capacity!
8. RELEASE the cylinder pressure before you start any maintenance or repair job.
9. REGULARLY CHECK for damaged parts. Broken parts can be dangerous. Check if operation is not impeded.
Replace worn and damaged parts as soon as possible. Do not operate machine before such parts have been replaced.
10. Never leave a working machine unattended. Shut off first. Release pressure!
11. Keep the workshop clean. Rubbish promotes accidents!
12. Never use machinery under hazardous conditions./ Make sure of proper lighting and ventilation. Do not expose
machinery to moisture, rain and snow. Don’t operate a machine when you are tired, ill o rare using medicines
which affect your reaction abilities. Never operate a machine when under the influence of alcohol or drugs!
13. Keep children and visitors at a safe distance.
14. Workshops are danger areas for children. Please lock up after you leave. Prevent children and laymen from
entering the workshop without your consent. Use multiple switches to prevent machines being switched on by the
ignorant.
15. BEWARE! Please wear anti slip footwear. If your hair is long, put it under your clothes. If necessary or
applicable, wear eye protection, ear protection or a face mask. Normal
spectacles will not protect your eyes!
17. Never reach across or through machines, in particular when in
operation. Ensure a safe body posture.
19. Never try to adjust a working machine!
20. Please read and heed the safety stickers on the machine. Keep them legible
and replace them when necessary. Removing such warning stickers is a crime
and could lead to legal actions!
21. These instructions for use are not a substitute for proper education.
22. In case you do not comply with any of the rules, guidelines and
warnings given here and on the machine, you are taking the risk of accidents, injury and damages which may even
result in death. You will be held responsible!