HBM T40S7 - English; Table of Contents

2 A3276-11.0 HBM: public T40FM
English
1 Safety information 4........................................
2 Markings used 10............................................
2.1 The marking used in this document 10...........................
2.2 Symbols on the transducer 11..................................
3 Applications 12..............................................
4 Structure and Mode of Operation 13..........................
5 Mechanical installation 15....................................
5.1 Important precautions during installation 15......................
5.2 Conditions on site 16..........................................
5.3 Installation orientation 16......................................
5.4 Installation options 17.........................................
5.4.1 Installation without dismantling the antenna ring 18................
5.4.2 Installation with subsequent antenna ring mounting 19.............
5.5 Preparing for the rotor mounting 20.............................
5.6 Mounting the rotor 23..........................................
5.7 Installing the stator 26.........................................
5.8 Mounting the rotational speed flange (rotational speed measuring
system only) 30..............................................
6 Electrical Connection 33.....................................
6.1 General information 33........................................
6.2 EMC protection 33............................................
6.3 Pin Assignment 34............................................
6.4 Supply Voltage 41............................................
7 Shunt signal 43..............................................
8 Functionality testing 44......................................
8.1 Rotor status, LED A (upper LED) 44.............................