Need help?Do you have a question about the HBM MX840B-R and is the answer not in the manual?
General| Interface | Analog |
|---|---|
| Operating Temperature | -10 °C to +40 °C |
| Output Resistance | 350 Ω |
| Rated Output | 2 mV/V |
| Supply Voltage | 10 V |
| Scanning Technology | Strain Gauge |
Covers appropriate use, general safety rules, and permissible supply voltages for safe operation.
Addresses environmental conditions, cleaning, operational dangers, and general precautions.
Defines personnel qualifications, modification restrictions, and safety symbols.
Introduces the SomatXR Rugged DAQ as a modular and universally applicable measurement system.
Provides a comprehensive overview of transducer compatibility across various SomatXR modules.
Describes MX modules, their connectivity, and common features like low voltage and status LEDs.
Guides initial connection and covers caselink/casemount installation for module setup.
Details universal mounting, power supply, networking, and synchronization for system configuration.
Covers transducer connection, EMC shielding, TEDS, and signal processing within the system.
Introduces data recorders and CPU layers used for controlling the SomatXR system.
Details PC software for control, including MX Assistant, catman®, API, and firmware updates.
Details universal input, bridge, and amplifier modules, their transducer compatibility, and features.
Covers specialized modules for thermocouples, frequency, CAN communication, pressure, and dynamic measurements.
Covers various analog transducer types, thermocouples, their signal conditioning, and connection methods.
Details digital inputs, communication interfaces, pressure, and crank wheel sensors for system integration.
Explains how to output measurement signals and calculated values to a CAN bus.
Describes real-time analog voltage outputs and Ethernet/PROFINET outputs for data.
Lists the versions, dates, and notes for revisions made to the document.
To Next Page
