To Next Page
K
Kimberly JacobsSep 7, 2025
What to do if HBM WE2108 show 'Factory characteristic faulty'?
- RrogerschristopherSep 7, 2025
Repair or re-enter the values.
What to do if HBM WE2108 show 'Factory characteristic faulty'?
Repair or re-enter the values.
What to do if HBM Scales show 'Temperature compensation faulty'?
Repair the unit.
What to do if HBM Scales unit switches itself on or consumes too much standby current?
General| Accuracy class | III |
|---|---|
| Maximum number of verification intervals | 3000 |
| Minimum load cell impedance | 350 Ω |
| Material | Stainless steel |
| Display | LCD |
| Interface | RS-232 |
Information regarding the proper use of voltage supply cables and shielding.
Details on the items included in the original packaging for WE2108 units.
Description of the functions of the keys on the WE2108 control panel.
Details on wiring the load cell, including terminal assignments and cable preparation.
Configuration and pin assignment for the RS-232 serial interface.
Instructions for mounting the WE2108 unit on a wall using its housing design.
Procedure for mounting the WE2108 unit on a stand for free-standing scales.
Covers essential operations like switching on/off, zeroing, taring, and display modes.
Detailed guide on navigating the WE2108's menu structure and parameter settings.
Explanation of how display limits are set based on the scale standard and nominal value.
How the tare function operates and how manual tare values are activated and used.
Step-by-step guide for performing a two-point calibration with zero and final values.
Advanced calibration methods to correct linearity errors in scale attachments.
Requirements for load cell supply voltage and output signal span for optimal performance.
How dead load and nominal values affect calibration and scale design.
Explanation of analog and digital filter functions for achieving stable measurements.
Setup and usage of the printing function for outputting weight data and additional information.
Technical specifications for the WE2108 unit with an ABS housing.
Dimensional drawings and measurements for the WE2108 unit in ABS housing.
Technical specifications for WE2108S/WE2108M units in steel housing.
