HCM Kinzel TAP IT! - Game Introduction and Setup; Introduction to Tap It; Game Preparations; Master Buzzer and Synchronization

1
2
3
4
1
1
2
4
3
Memo is a classic game in
a new form that stimula-
tes the memory. In Memo
the buzzers light up one
after the other in a certain
order. After each sequence
there is a further step. The chal-
lenge is to follow the ashing colors on the buzzers and
repeat the sequence correctly.
Play Memo!
Step 1: Slides the switch on the bottom of the Master Buz-
zer to position 3. Selects how many players will play. To
do this, press the Master Buzzer. Each time you press, the
buzzers light up in a specic color. Each color stands for
one player.
Step 2: After you have selected the number of players, wait
until the buzzers stop blinking. You will then hear a beep
that indicates the start of the game.
Step 3: The starting player tries to memorize the sequen-
ce of the ashing buzzers and to repeat the sequences by
pressing the buzzers. After each correctly repeated se-
quence there is a further step
Step 4: If the player makes a mistake, the next player‘s
turn comes. The buzzers then ash in the
player‘s color.
Win Memo!
The player who could remember the longest
sequence wins. The buzzers indicate the
winner by lighting up the winner‘s color and
sounding a beep.
At TAP IT each player is
assigned a color. The
colors of the buzzers are
constantly changing. The
players must press a buz-
zer whenever their own color
lights up.
Play TAP IT!
Step 1: Slides the switch on the master buzzer to position
1 for Tap It. Selects how many players play along. To do
so, press the Master-Buzzer as often as there are players.
Each time you press, the buzzers light up in a certain co-
lor. Each color stands for one player. For example, if you
play with 3 players, you need 3 different colors and have to
press the Master-Buzzer 3 times.
Step 2: After you have selected the number of players, wait
until the buzzers stop ashing. You will then hear a beep
that indicates the start of the game.
Step 3: The game starts with the buzzers lighting up in dif-
ferent colors. Each player should now press on the buzzers
with the assigned color.
E.g. player 1 is blue, player 2 is red, etc.
Win TAP IT!
After each game round, the buzzers indicate the winner
by lighting up the color that was buzzed the most and a
beep is heard.

Playtip: The buzzers can stand on a table or be placed
far away from each other (up to 5 meters from the master
buzzer!).
Plays Tap It and Switch with up to 8 players
The number of players is determined by the number of
colors, not by the number of buzzers.
Introduction
Tap It is a super high-tech action game. It is fast, chal-
lenging and a lot of fun with 4 different game variations.
Preparations
There are a few things to consider before starting the
game: Make sure that there is enough space to place the
buzzers at a distance so that you can move freely. The
buzzers can be positioned up to ve meters apart.
The Master-Buzzer
Tap It has two different types of buzzer
in the game. First the master buzzer and
then three more standard buzzers.
Before you start playing, all buzzers have to be
synchronized with each other:
Turn on the Master Buzzer by sliding the control
switch on the oor to the desired play mode.
Turn on all other buzzers by sliding the switch on
the bottom. All buzzers should now ash blue.
The buzzers are then in wait mode.