Pump Stroke Counter
User’s Manual – 2100, Rev D | Aug 2014
2
TABLE OF CONTENTS
• Section 1 – Introduction……………………………………………………………….4
1.A General Information
1.B Unpacking and Inspection
1.C Cautionary Information
1.D Personnel Qualifications
• Section 2 – HDI 2100 Pump Stroke Counter System Overview………………..5
2.A Control Head
2.B Power Pack
2.C Pump Stroke Sensors
o 2.C.1 Microswitch Sensor
o 2.C.2 Proximity Sensor
2.D Certification
• Section 3 – Installation………………………………………………………………..8
3.A Control Head
3.B Cable Assembly
o 3.B.1 Microswitch Sensor
o 3.B.2 Proximity Sensor
3.C Sensor Assembly
o 3.C.1 Microswitch Sensor
o 3.C.2 Proximity Sensor
• Section 4 – Maintenance…………………………………………………………….10
4.A Power Pack
4.B Processor Boards
4.C Sensors
4.D Increasing Existing PSC Pump Capacity
• Section 5 – Troubleshooting………………………………………………………..11
5.A Battery Voltage
5.B Simulate Signals
o 5.B.1 Microswitch Sensor
o 5.B.2 Proximity Sensor
5.C Debounce / Main PCB
• Section 6 – Options…………………………………………………………………..12
To Next Page