7, vibration alarm setting
Command format: vibration, Alarm level,[ Alarm way]#
For example: vibration,2# (Alarm level :2, Alarm way: default 1 )
vibration,2,3# (Alarm level :2, Alarm way: 3)
Alarm level value 0～5 ，0 shut off the alarm，1～5 The higher the more
lower sensitivity.
Alarm way: 1 is telephone alarm , 2 is SMS alarm , 3 is telephone+
SMS alarm, default :1 telephone alarm.
8, Overspeed alarm setting
Command format: speeding, speed,[ Alarm way]#
For example: speeding,120#
speeding,120,3#
9, Check the parameter Settings
Command : param#
10, Check the GPS status
Command: status#
11, Restart the device
Command: reset#
12, Set time zone
Command format: GMT,E\W,time zone#
To Next Page
Loading...
