HEADRUSH FRFR-112 - Appendix; Technical Specifications

27
Appendix (English)
Technical Specifications
Output Power
2000 W (peak, 1300 LF + 700 HF)
1000 W (continuous RMS, 650 LF + 350 HF)
Drivers Low-Frequency
12.0” (305 mm) low-frequency driver, 3.0”
(
76 mm)
high-temperature voice coil
High-Frequency
1.4”
(
35 mm) voice coil, neodymium-magnet
high-frequency driver with precision waveguide
Crossover Frequency
2.0 KHz
Maximum SPL
131 dB (peak), 128 dB (continuous) (dB-SPL @ 1 m)
Frequency Response
53 Hz – 20 kHz (+3 dB)
Frequency Range
46 Hz – 22 kHz (-10 dB)
Horn Coverage
90º horizontal x 60º vertical (nominal)
Equalization
Contour switch with low- and high-frequency +3 dB boost
Connectors
(2) XLR/TRS 1/4” (6.35 mm) combo inputs
(1) XLR link output
(1) IEC power cable input
Controls
Power switch, (2) volume control knobs (1 per input), EQ contour switch,
ground-lift switch
Indicators
(2) power LEDs (1 front-panel, 1 rear-panel), clip limiter LED
Protection
Electronic clip, thermal & transducer overdrive
Power Connection
IEC
Input Voltage
100 V~, 110–120 V~, 220–240 V~; 50/60 Hz (switchable)
Fuse
100–120V T10AL AC250V
220–240V T5AL AC250V
Consumption
800 W
Enclosure
Trapezoidal, injection-molded polypropylene enclosure with perforated
steel grille
Dimensions
(height x width x depth)
23.8” x 13.9” x 13.8”
605 x 354 x 350 mm
Weight
35.9 lb.
16.3 kg
Specifications are subject to change without notice.
Trademarks & Licenses
HeadRush is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. Avid and
Eleven are registered trademarks of Avid Technology, Inc. in the U.S. and other countries. All other
product names, company names, trademarks, or trade names are those of their respective owners.