What to do if my Healt o meter Scales does not turn on?
If your Healt o meter Scales does not turn on, it could be due to a dead battery. Try attaching the adapter to recharge the battery. If that doesn't work, the problem could be a faulty electrical outlet, so try using a different outlet. Alternatively, the power supply might be bad, in which case you should replace the adapter.
Why my Healt o meter Scales showing questionable weight or not zeroing?
If your Healt o meter Scales is showing questionable weight or not zeroing, there might be an external object interfering with the scale; remove any such object. Also, ensure the display showed '0.0' before weighing; if not, have the patient get off the scale and begin the weighing process again. The scale should be on a level floor. If not, place it on a level floor and restart. Finally, the scale might be out of calibration; check the weight with a known weight value.
What to do if my Healt o meter Scales shows --OF--?
If your Healt o meter Scales displays '--OF--', it means the load on the scale exceeds its capacity (440 lb / 200kg). Remove the excess weight to use the scale within its limits.
What does “ - 0F- “ mean on my Healt o meter Scales?
If the display on your Healt o meter Scales shows “ - 0F- “, it indicates that the load on the scale exceeds the maximum capacity (440 lbs / 200 kg). Remove the excess weight and use the scale according to its limits.
What does P-L mean on my Healt o meter Scales?
If your Healt o meter Scales shows 'P-L', it means the battery is low. Recharge or replace the battery.
What does Err 1 mean on my Healt o meter Scales?
If your Healt o meter Scales shows 'Err 1', it indicates that the scale is below the minimum calibration weight. The calibration weight must be more than 20kg. The recommended calibration weight is 200kg (440 lbs).
What does 0-H mean on my Healt o meter Scales?
If your Healt o meter Scales displays '0-H', it indicates that the load cell is not connected properly. Check the cables and mechanical connections. If the problem persists, replace the load cell.
What does 0-L mean on my Healt o meter Scales?
If your Healt o meter Scales displays '0-L', it indicates that the load cell is not connected properly. Check the cables and mechanical connection. If the problem persists, replace the load cell.
Set automatic scale power-off time to conserve battery life, ranging from 0 to 18 minutes.
Instructions for cleaning the scale's surfaces using a damp cloth and mild soap solution.
Identifies common error codes, their definitions, and corrective actions for scale issues.
Defines the one-year warranty against defects in materials and workmanship.
Outlines that the original purchaser with proof of purchase is covered by the warranty.
Lists conditions and damages not covered by the warranty, including misuse and natural disasters.
General| Brand | Healt o meter |
|---|---|
| Model | 594kl |
| Category | Scales |
| Language | English |
To Next Page
