Health Zenith 7451 User Manual

This chime requires 3 “C” alkaline batteries (not included). In typical use,
alkaline batteries will last up to 2
1
/
2
years.
Wireless Chime
© 2016 HeathCo LLC 207356-02A
Figure 2
Figure 1
WARNING: To prevent possible
SERIOUS INJURY or DEATH:
• NEVER allow small children near
batteries.
• If battery is swallowed, immediately
notify doctor.
Model 7451
Chime
base
MODEL: WL-4B
1 – MODE 2 – TUNE
C
H
I
M
E
V
O
L
U
M
E
3x - “C” TYPE BATTERIES
Chime
cover
Wireless push
button
Hardware
pack
✔ ✔ ✔ ✔
This package includes (Style of door sensor and chime may vary from illustration):
1. Remove orange battery tab from push
button. Remove back of case by pushing in
tab on bottom with a small screwdriver (see
Figure 1). Remove orange battery tab.
2. Remove chime cover. While holding the
chime cover in one hand, use the hole in the
chime base to remove the chime base from the
chime cover (see Figure 2). Note: To remove
chime cover after chime base is mounted,
firmly grasp chime cover and pull.

Health Zenith 7451 Specifications

General

Brand	Health Zenith
Model	7451
Category	Accessories
Language	English

Summary

Tune Settings

Selecting Chime Tunes

Instructions for selecting different chime tunes (Ding, Ding-Dong, Westminster) using switch 2.

Troubleshooting

Chime Does Not Sound

Addresses issues where the chime fails to sound or quits after one ring, including battery and sync problems.

Chime Not Working After Installation

Solutions for when the chime is unresponsive post-installation, considering mounting and range issues.

False Triggers and Interference

Resolves unintended chime activations caused by interference or sync issues.

Technical Service

Contacting HeathCo LLC for Support

Information on how to contact technical support and what details to provide for assistance.

Regulatory Information

FCC Compliance and User Caution

Details on device compliance with FCC rules and user responsibilities regarding operation and modifications.

One Year Limited Warranty