Heart Interface 25 User Manual

Part No. 90-0123-00
Libertycombi.p65 11/05/99
21
CAUTIONCAUTION
CAUTIONCAUTION
CAUTION This equipment is
not ignitionnot ignition
not ignitionnot ignition
not ignition
protected protected
protected protected
protected and employs components that can
produce arcs or sparks. To reduce the risk of
fire or
explosions, do not install inexplosions, do not install in
explosions, do not install inexplosions, do not install in
explosions, do not install in
unvented compartments containingunvented compartments containing
unvented compartments containingunvented compartments containing
unvented compartments containing
batteries or flammable gasses batteries or flammable gasses
batteries or flammable gasses batteries or flammable gasses
batteries or flammable gasses or areas in
which ignition-protected equipment is required.
INSTINST
INSTINST
INST
ALLAALLA
ALLAALLA
ALLA
TION PRECAUTIONSTION PRECAUTIONS
TION PRECAUTIONSTION PRECAUTIONS
TION PRECAUTIONS
For continued protection against risk of
electric shock, use only the ground-fault
circuit interrupter (GFCI) type receptacles
detailed in this manual. Other types may
fail to operate properly when connected to
this inverter, resulting in a potential shock
hazard.
WW
WW
W
ARNINGARNING
ARNINGARNING
ARNING
CAUTIONCAUTION
CAUTIONCAUTION
CAUTION To reduce the risk of electric shock
and prevent premature failure due to corrosion,
do not mount where exposed to rain,do not mount where exposed to rain,
do not mount where exposed to rain,do not mount where exposed to rain,
do not mount where exposed to rain,
dripping or spraydripping or spray
dripping or spraydripping or spray
dripping or spray
..
..
.
CAUTION CAUTION
CAUTION CAUTION
CAUTION To reduce the risk of fire, do not
obstruct ventilation openings. Do not mount
in a zero clearance compartment,
overheating may result.
CAUTIONCAUTION
CAUTIONCAUTION
CAUTION
Risk of electrical shock. BothRisk of electrical shock. Both
Risk of electrical shock. BothRisk of electrical shock. Both
Risk of electrical shock. Both
AC & DC voltage sources are terminatedAC & DC voltage sources are terminated
AC & DC voltage sources are terminatedAC & DC voltage sources are terminated
AC & DC voltage sources are terminated
inside this equipment.inside this equipment.
inside this equipment.inside this equipment.
inside this equipment.
Before servicing
disconnect all inputs and outputs.
TT
TT
T
ypical Typical T
ypical Typical T
ypical T
ools Neededools Needed
ools Neededools Needed
ools Needed
Flathead and Phillips Screwdrivers
Allen (Hex) Screwdriver (1/8”)
Wrench for connecting battery cables (9/16”)
Wire Cutters
Wire Strippers
Misc. assortment of wire ties and connectors
Accessories Needed for InstallationAccessories Needed for Installation
Accessories Needed for InstallationAccessories Needed for Installation
Accessories Needed for Installation
Fuse - UL Listed DC Rated slow blow fuse as
required by NEC
Electrical wire (10 gauge) for AC input wiring.
Consult NEC for proper size for output wiring.
Battery Cables 1- Positive, 1-Negative
Consult NEC for proper size
DC fuse cable
Mounting Screws (4)
Confirm that your shipping carton contains:Confirm that your shipping carton contains:
Confirm that your shipping carton contains:Confirm that your shipping carton contains:
Confirm that your shipping carton contains:
• Inverter/Charger
• TSC temperature sensor with 15’ cable
• Owners Manual
• Warranty Card
• Jumper for AUX Switch (only used
without
Remote Control Panel or Link Instrument)
• Wire Nuts
The Freedom 15D and 20D have
dual AC Outputs.
Freedom 20Freedom 20
Freedom 20Freedom 20
Freedom 20

Heart Interface 25 Specifications

General

Brand	Heart Interface
Model	25
Category	Battery Charger
Language	English