EasyManua.ls Logo

Heat Controller EKTC07-1G - Retrofit Sleeve Preparation

Heat Controller EKTC07-1G
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Packaged Terminal A/C OWNER’S MANUAL Heat Controller, Inc.
7
RETROFIT SLEEVE PREPARATION
IMPORTANT: Inspect wall sleeve thoroughly prior to installation. Manufacturer does not assume responsibility for costs
or damages due to defects in sleeve or for improper installation.
WARNING
ELECTRICAL SHOCK HAZARD
Failure to follow this warning could result in personal injury
or death.
Disconnect all power to unit to avoid possible electrical
shock during installation.
!
NOTE: See installation instructions included with wall sleeve
for information on installation.
NOTE: Wall sleeves with a depth of 13.75” to 13.88” can be
used in combination with competitive grilles.

Related product manuals