Heath Zenith 7303 User Manual

Wireless Push Button
Accessory
© 2018 HeathCo LLC 207667-05A
Model
Wireless
push
button
Wireless
push
button
Hardware
pack
7303
✔ ✔
7797
✔ ✔
7393
✔ ✔
The Heath
®
Zenith wireless push button accessory works with any Heath
®
Zenith
wireless chime. This package includes:
Style of push button may vary from illustration. Note: All
illustrations show model 7797. The instructions are the
same for all models.

Heath Zenith 7303 Specifications

General

Voltage	120 VAC
Wired	Yes
Application	Outdoor
Time Delay	Adjustable
Light Sensitivity	Adjustable
Weather Resistance	Yes
Type	Motion Sensor
Operating Temperature	-20°F to 120°F

Summary

Safety Warnings

General Safety Precautions

Crucial safety advice for children and battery handling.

Syncing Push Button and Chime

Sync Chime Type A

Instructions to pair the push button with Chime Type A.

Sync Chime Type B

Instructions to pair the push button with Chime Type B.

Sync Chime Type C

Instructions to pair the push button with Chime Type C.

Installation and Setup

Test Push Button Range

How to verify the operational range of the installed push button.

Mount Push Button

Methods for securely attaching the push button to surfaces.

Battery Replacement Guide

Steps for replacing batteries in the push button.

Tune Customization

Chime Type A Tune Settings

Configure tunes for Chime Type A using push button settings.

Chime Type B Tune Settings

Configure tunes for Chime Type B using push button settings.

Chime Type C Tune Settings

Configure tunes for Chime Type C using push button settings.

Troubleshooting Common Issues

Support and Compliance

Technical Support Contact

How to get assistance from Heath Zenith technical service.

Regulatory Information

FCC and Industry Canada compliance statements for the device.

One Year Limited Warranty