Heath Zenith TT-6139 - User Manual

12 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

© 2001 DESA International 595-5659-06

Features

• Add switched outlet convenience without rewiring.

• Can be used inside or outdoors.

• Several different channels available, so multiple switches can be

used in the same home.

Wireless Indoor

and Outdoor

Remote Control

Model SL/TT-6139

Transmitter Operational Instructions

Note: You will need to buy a 9-volt alkaline battery for the remote

control. In typical use, this battery will last about one year.

Remove the battery during extended periods of non-use.

Multiple channels (F thru H) are available so that you can operate

several systems at different locations in your home. If you purchase

more than one wireless control system, make sure you select

different operating channels or they will interact with each other.

1. Install the 9-volt battery. Remove the cover from the back of

the transmitter by pressing on it with your thumb and sliding it

off as shown. Plug in the battery and slide the cover back onto

the transmitter.

BATTERY

Cover

Table of Contents

Questions and Answers

V
vmcneilAug 11, 2025
What to do if my Heath Zenith TT-6139 light does not come on?
- S
  Samuel LucasAug 11, 2025
  If your Heath Zenith Remote Control light isn't turning on, here are a few things to check: 1. Make sure the circuit breaker or fuse is turned on. If it's off, turn it on; if it's a fuse, replace it. 2. Ensure the switch on the lamp itself is turned on. 3. The bulb may be defective, so try replacing it. 4. Check for any metal objects that might be blocking the signal from the transmitter, or try moving the transmitter closer. 5. The transmitter battery could be weak, so replace it with a fresh one.
C
Christopher SilvaAug 21, 2025
Why does my Heath Zenith TT-6139 Remote Control light come on randomly?
- P
  Pamela PetersAug 21, 2025
  Your Heath Zenith Remote Control light might be turning on randomly due to a short-term power line failure or another transmitter operating on the same channel.
K
Kelsey RobinsonAug 31, 2025
What to do if my Heath Zenith TT-6139 Remote Control light does not turn off?
- M
  Melissa RayAug 31, 2025
  If your Heath Zenith Remote Control light isn't turning off, consider these possibilities: * You might be switching the transmitter button too quickly. Wait at least 3 seconds between presses. * There might be metal objects blocking the signal, so check around the transmitter. Try repositioning the transmitter. * The battery in the transmitter could be weak, so try replacing it.

Heath Zenith TT-6139 Specifications

General

Model	TT-6139
Category	Remote Control
Color	White
Type	Universal
Battery	12V battery (included)
Weight	4 ounces

Related product manuals

Heath Zenith SL-6005