Need help?Do you have a question about the Heathkit HP-23A and is the answer not in the manual?
General| Input Voltage | 117 VAC |
|---|---|
| Input Frequency | 50-60 Hz |
| Output Voltages | +800 VDC, +300 VDC, -130 VDC, 6.3 VAC, 12.6 VAC |
| Output Current (+300 VDC) | 150 mA |
| Output Current (-130 VDC) | 50 mA |
| Output Current (6.3 VAC) | 4 A |
| Voltage Regulation | ±1% |
Lists resistor components with part numbers and descriptions.
Lists capacitor components with part numbers and descriptions.
Lists hardware components like screws, nuts, and washers.
Lists other components like switches, transformers, and sockets.
Instructions for mounting components onto the chassis.
Details on connecting the power transformer leads.
Instructions for wiring components within the chassis.
Steps for installing various electronic components like resistors and capacitors.
Completing the internal wiring connections of the unit.
Steps for assembling the outer casing and final components.
General advice for resolving common assembly and operational issues.
A table listing common difficulties and their possible causes.
Explains the AC input and primary power handling.
Describes the high voltage generation and rectification.
Details the low voltage DC output generation.
Explains the generation of fixed and adjustable bias voltages.
Describes how filament voltages are provided.
To Next Page