Helpful Videos – www.hzsupport.com Helpful Answers – 1-800-858-8501
4
WARNING: Disconnect chime unit from power source before
opening chime access door. Close door and replace screw before
reconnecting to power.
Tune Settings
Tune Setting Table
The chime has different selectable tunes: Ding (one note tune), Ding-Dong
(two note tune), or Westminster (eight note tune). The factory setting is for the
Westminster tune. This tune can be changed by following the instructions in
the Tune Setting Table.
Note: All chime models are designed to work with up to 5 transmitters (push
buttons and/or sensors – sold separately). All chimes are designed to play only
two different tunes no matter how many transmitters are used.
Multifunction ButtonInside Push Button Inside Sensor
Push Button /
Sensor
Chime Tune
Jumper - ON ——— Ding
Jumper - OFF Press and release button on chime.
Listen for selected tune. Repeat to
select different tune.
Ding-Dong or
Westminster
CR2032
CR2032
To Next Page
Loading...