Need help?Do you have a question about the Heco CELAN GT 902 and is the answer not in the manual?
Specifies recommended cable cross-sections for optimal sound quality and to prevent impairment.
Details on stripping insulation, twisting wires, terminal connection, polarity, and short circuit prevention.
Describes the connector panel, bi-wiring, and bi-amping options for enhanced sound reproduction.
Ideal stereo setup: equilateral triangle, line of sight, and wall distance recommendations.
Instructions for using spikes to decouple speakers from surfaces and prevent unwanted resonance.
Guidelines for positioning front, rear, and center speakers, including specific notes for Celan GT 102F.
Optimal placement for center speakers and notes on integrating the active subwoofer with Celan GT series.
Illustrates two methods for connecting to AV receivers (with/without subwoofer output).
Advice on preventing damage from incorrect tone control use, amplifier power mismatch, and distortion.
Recommendations for cleaning lacquered surfaces using mild household cleaners.
General| Impedance | 4 - 8 Ohms |
|---|---|
| Woofer | 2 x 200 mm |
| Tweeter | 25 mm |
| Recommended Amplifier Power | 30 - 300 W |
| Cabinet Surface | High-gloss finish |
| Type | 3-way floorstanding speaker |
To Next Page
