EasyManua.ls Logo

Hegel HD11 - TECHNICAL SPECIFICATIONS; Specifications Summary; Important Notes and Warnings; Voltage Setting

Hegel HD11
8 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TECHNICAL SPECIFICATIONS
HEGEL HD11 High End D/A Converter
Digital inputs Coaxial / optical up to 24bit 192kHz
USB up to 24bit 96kHz
Dac IC / digital lter 32 bit
Output signal level 2.5V RMS (at 0dBFS)
Digital inputs 2 coaxial, 1 optical and 1 USB-B
Analog outputs Gold plated XLR balanced and gold plated RCA / phono unbalanced
Frequency response 0Hz - 50kHz
Phase response Linear phase analog lter
Noise oor -140dB
Distortion Typically less than 0.0007%
Power supply Internal toroidal transformer and 30.000uF capacitors
Dimensions / weight 6cm x 21cm x 26cm (HxWxD) / 3.5kg
Specications are subject to change without notice.
NOTE & WARNING
Hegel products should only be opened and / or serviced by certied Hegel technicians. The device contains
electronic components that may cause severe electric shock. Work performed on Hegel products by unquali-
ed personnel can cause serious damage and personal injury.
Opening of the product by non-authorized personnel will void the warranty.
The product must not be exposed to rain or moisture.
VOLTAGE SETTING
Underneath the HD11 there is a red switch to toggle between 115V (use for 100-120V) and 230V mains
voltage. Please check and conrm that the setting is correct for your country before use. If you are uncertain
of the correct setting, please consult your Hegel dealer.
WARRANTY
All Hegel products come with a 2-year warranty against defective materials and workmanship.
In case you should need any assistance with your Hegel product please nd your nearest dealer or distributor
by looking at the Hegel website: http:\\www.hegel.com
If you have any problems locating your dealer or distributor please e-mail to info@hegel.com
www.hegel.com info@hegel.com

Related product manuals