Do you have a question about the Hegel HD12 and is the answer not in the manual?
digital input resolution | Up to 24bit 192kHz |
---|---|
digital inputs | 1 coaxial, 2 optical and 1 USB-B |
output signal level | 2.5V RMS (at 0dBFS) |
---|---|
frequency response | 0Hz - 50kHz |
noise floor | Typically -145dB |
distortion | Typically less than 0.0005 % |
power supply | Internal toroidal transformer and 20.000F capacitors |
---|---|
voltage setting | 115V and 230V |
dimensions | 6cm x 21cm x 26cm (HxWxD) |
---|---|
weight | 3.5kg |
Controls the power switch for calibration and muted outputs during startup.
Describes changing the input source using the front panel or remote control.
Lists and describes the functions of buttons on the Hegel system remote control for amplifiers and DACs.
Details how to use key remote buttons like INPUT, VOL-, and VOL+ for HD12 operation.
Explains how to turn the HD12 display on/off using the DISP button.
Details the USB mode selector switch for different resolution and DSD modes.
Guidance on setting up Mac/PC for USB audio output and 24-bit playback.
Lists and describes analog and digital inputs/outputs including RCA, XLR, Optical, and USB.
Recommends connecting signal cables when units are off and using balanced XLR outputs for best quality.
Guidelines for placing the unit on a flat surface with adequate air circulation.
Notes that the DAC performs best after about 30 minutes and needs ~100 hours for maximum sound quality.
Describes how to clean fingerprints or stains with a damp cloth and mild detergent.
Instructions for packing the D/A Converter safely for transport using plastic bags and shock absorbers.
Lists key technical specs like digital inputs, output level, frequency response, power supply, and dimensions.
Advises on servicing by certified technicians and avoiding exposure to rain or moisture.
Instructs users to check and confirm the 115V/230V voltage setting switch underneath the unit.
States that all Hegel products have a 2-year warranty against defects.