Need help?Do you have a question about the HEIDENHAIN LB 302 C and is the answer not in the manual?
General| Grating Period | 20 µm |
|---|---|
| Output Signal | TTL |
| Scale Material | Glass |
| Power Supply | 5 V DC |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20 °C to +70 °C |
Safety and warning information for installation and operation.
List of components included in the delivery package.
List of optional accessories available for separate purchase.
General guidelines and considerations for mounting the encoder.
Steps to prepare the encoder and workspace before mounting.
Procedure for reconfiguring the encoder's cable exit point.
How to set the position of the reference mark on the encoder.
Technical dimensions for the standard configuration of the encoder.
Technical dimensions for the mirror-imaged configuration of the encoder.
Specifies acceptable tolerances for mounting the encoder.
Instructions on how to securely attach the encoder unit.
Procedures for verifying the encoder's installation and alignment.
Concluding checks and actions after installation.
Method for correcting linear measurement errors.
Steps to properly tension the scale tape.
Measures to protect the encoder from environmental factors.
Pin assignments and wiring for LB 302/LB 302 C models.
Technical data and output signal characteristics for LB 302/LB 302 C.
Pin assignments and wiring for LB 382/LB 382 C models.
Technical data and output signal characteristics for LB 382/LB 382 C.
Physical properties, tolerances, and environmental ratings of the encoder.
To Next Page
