To Next PageTo Next Page
Need help?Do you have a question about the Heidolph Hei-PLATE Mix'n'Heat Expert and is the answer not in the manual?
General| Heating Power | 600 W |
|---|---|
| Control Type | Digital |
| Max Stirring Volume (H2O) | 20 L |
| Heating Plate Material | Aluminum |
| Permissible Relative Humidity | 80 % |
| Protection Class | IP 21 |
| Voltage | 230 V |
| Set-up Plate Material | Aluminum |
| Permissible Ambient Temperature | 5°C to 40°C |
Describes the functions and operation of the magnetic stirrers and is an integral part of the device.
Explains standardized symbols, signal words, and highlighting elements used to warn of hazards and identify information.
States that the document is protected by copyright and intended for purchaser use only.
Refers to a Safety Guide for safety instructions in EU languages, available for download.
Details CE marking and NRTL certification standards the device meets.
Provides information for California residents regarding Proposition 65.
Clarifies software copyright and rights holder information.
Identifies and describes residual risks associated with the device during use and maintenance.
Defines the device's purpose for laboratory activities like heating, mixing, stirring, and titrating.
Emphasizes familiarization with safety regulations, ensuring faultless condition, and correct usage.
Covers voltage matching, grounding, and authorized maintenance for electrical safety.
Outlines user responsibility for data security during transfers, recommending secure networks and cables.
Details safe operating practices, including ventilation, avoiding obstructions, and using genuine parts.
Specifies PPE requirements, distances for pacemakers, and hazards from emissions or uncontrolled reactions.
States that the operating company must determine and provide necessary PPE.
Requires measures to avoid environmental hazards when processing hazardous substances.
Mandates measures to prevent hazards from biohazardous substances, including personnel instruction.
Advises observance of all applicable regulations, including local and safety engineering rules.
Illustrates and labels the key components and controls of the Hei-PLATE Mix'n'Heat Expert.
Details the connection sockets and interfaces available on the device.
Explains the meaning of various symbols and data displayed on the device screen.
Provides an overview of the menu structure for the device variants.
Describes how to navigate through the device's main menu and submenus.
Explains the function and usage of the device's push-and-rotary controls.
Details how to lock and unlock the push-and-rotary controls to prevent accidental adjustments.
Provides safety instructions for choosing a location and installing the device.
Describes optional silicone covers for protection against soiling or damage.
Explains how to connect the power supply cable and the Standby button behavior.
Advises checking and adapting basic settings like time, date, and temperature unit.
Offers cautions regarding high speeds, load distribution, and using closed vessels.
Details the procedure for switching the device on and off using the Standby button.
Guides users to set temperature units, language, and date/time.
Explains how to define whether button presses are acknowledged with sounds.
Describes the 'Safe' and 'Expert' interface modes for controlling the device.
Explains the auto standby function which switches off the device after idle time.
Describes how to reset the device to its original factory settings.
Details safety functions like Safety temperature △T and Sensor monitoring.
Explains the device's behavior after a power outage (Modes A, B, C).
Describes how to set a maximum limit for the heating plate temperature.
Explains how the device monitors internal housing temperature and reacts to overheating.
Details the indicator for residual heat on the heating plate after shutdown.
Explains the different heating modes (FAST, PRECISE, PRECISE+) available with external sensors.
Guides on setting the desired temperature and activating the heating function.
Provides cautions for using open vessels and describes setting rotational speed.
Explains the stir bar detector function for detecting loss of magnetic coupling.
Describes the soft start function for defining the rotational movement start speed.
Explains how to preselect the rotational direction of the magnetic stirring bar.
Details interval operation for reversing rotation direction to achieve homogeneous results.
Explains the timer function for presetting stirring and heating times independently.
Covers operation with an external Pt1000 sensor for accurate temperature control.
Guides on calibrating the displayed temperature value with an external sensor.
Describes using a double sensor for monitoring heating medium temperature.
Explains how to record process data (time, temperature, speed) onto a USB stick.
Details controlling the device remotely via PC or server-based software.
Covers the operation of the device with an optional lab jack, including setup and connection.
Explains how to mechanically limit the lab jack's travel distance using clamping levers.
Provides cautions and operational guidance for using the lab jack mechanism.
Describes settings for automatic lab jack lowering based on timer or error conditions.
Explains how to create, save, and manage multiple consecutive process steps as profiles.
Details the graph function for automatically recording and displaying temperature and rotation curves.
Guides on accessing device info, network info, operating time, and error lists.
Presents a table of common malfunctions and their possible causes and remedies.
Lists warning codes with descriptions and remedies for device issues.
Details error codes, their descriptions, and the necessary remedies or actions.
Provides detailed technical data for the device, including dimensions, power, and environmental conditions.
Lists technical specifications for the e-Lift lab jack accessory.
Details the default factory settings for various device parameters and their adjustment ranges.
Documents commands for querying device status and setting parameters via RS-232/USB B.
Shows the pin assignment for temperature sensor connection sockets.
Lists the items included in the product's scope of delivery.
Provides information on available accessories and where to find detailed information.
Covers general advice on device service, cleaning, software updates, repairs, and maintenance.
Outlines regulations for the disposal of the device and batteries.
Details the manufacturer's three-year warranty terms and conditions.
Provides contact details for technical service and distributors.
