To Next PageTo Next Page
Need help?Do you have a question about the Heidolph Hei-VAP and is the answer not in the manual?
General| Heating Bath Capacity | 5 l |
|---|---|
| Vapor Temperature Sensor | Yes |
| Display | Digital |
| Lift Mechanism | Manual or Motorized |
| Type | Rotary Evaporator |
| Bath Volume | 5 l |
| Lift Type | Manual or Motorized |
| Rotation Speed | 20 to 280 rpm |
| Vacuum Control | Yes |
| Evaporation Capacity | Up to 3000 mL |
| Power Supply | 230 V, 50/60 Hz |
Provides fundamental safety guidelines for operating the device.
Defines the device's authorized applications and operational boundaries.
Covers electrical hookup requirements and associated safety measures.
Emphasizes safety measures for personnel and adherence to relevant regulations.
Provides crucial safety guidelines to follow during the operational phase of the device.
Introduction to the Hei-VAP Precision's control panel interface and layout.
Explanation of buttons, display, and softkey functions on the control panel.
Details on filling, immersing, and operating the heating bath and lift mechanism.
Explanation of how to navigate through the device's menu system and options.
Instructions for setting and modifying the flask rotation speed for optimal evaporation.
Procedures for setting and controlling the temperature of the heating bath.
Calculating vapor temperature and overview of process modes.
Details on operating the device by controlling vacuum at a set pressure.
Managing vacuum settings and operating in AUTOeasy mode.
Details on operating the device in the mode controlled by the vapor temperature sensor.
Storing and recalling preferred distillation parameter configurations.
Programming pressure ramps for controlled distillation sequences.
Detailed steps for configuring pressure-time ramps in gradient mode.
Procedure for calibrating the device's vacuum sensor.
Configuration parameters specific to the AUTOaccurate operational mode.
Parameters for programming and managing gradient pressure ramps.
Instructions for mounting and removing the evaporating and receiving flasks.
Comprehensive guide to common errors, their causes, and recommended remedies.
Detailed instructions for making electrical connections and ensuring safety.
Installing optional sensors for vapor temperature and AUTOaccurate mode.
Connecting the vacuum box and its sensor to the main unit.
Safety measures and steps required before dismantling the unit.
Provides detailed technical data, specifications, and performance characteristics of the Hei-VAP Precision.
Information on how to contact technical service for questions or repair work.
