Issued September 2017
On-Route Operation Procedures
Copyright 2017, Heil Environmental
Printed in U.S.A.
121
DuraPack
®
5000
LOADING REFUSE WITH A WINCH
(CONTINUED)
DANGER
Do not use riding step when vehicle speed is more than 10
MPH or to travel more than 2 tenths (0.2) of a mile. Do not
use riding step when vehicle operates in reverse. Always
face vehicle when using riding step.
DANGER
Do not ride on or in the hopper opening. Use riding step
and obey all safety messages.
7. Each helper must PRESS the buzzer on their side of
the tailgate and let the driver know each helper is
ready to move to the next location.
8. Go to the next stop on the route.
To Next Page