HEIL DuraPack 5000 2017 - Models

Issued September 2017
Introduction
Copyright 2017, Heil Environmental
Printed in U.S.A.
12
DuraPack
®
5000
MODELS
The DuraPack
®
5000 is a Rear End Loader (REL) and has one body model, the eject model. See the figure below.
The blade and upper panel open the hopper for loading refuse into the hopper, sweep the refuse into the body and
compacts the refuse.
The unit has an eject mode for dumping the refuse from the body. You remove the refuse from the body by raising the
tailgate and then operating the ejector panel which pushes the refuse from the body.
Figure 1. Eject Model