4.3 Resharpening the Clipper Blades
Only work with sharp clipper blades. Replace blunt blades or those with missing teeth. Proper
resharpening can only be done with a special machine and by a trained technician contactable
through your service centre.
4.4 Storing the Clipping Machine
Only store the machine and charger in a dry place and in the case supplied. Do not switch on
the machine if you suspect any liquid has got into it. There is then a risk of an electric shock or
short circuit. Hand the clipping machine into a service centre.
Make it a habit to store the machine between use, store it well-cleaned, oiled and with tension
slackened off, in its storage case, in a clean, dry place, out of the reach of children.
5 Repairs
This product has been developed and assembled using the best individual components availa-
ble.It is designed to give longevity and high performance. If spare parts are used during the
life of this product, please ensure that they are genuine Heiniger parts. Failure to use genuine
Heiniger spares may reduce the performance of this precision engineered product and will
void any warranty claim.
5.1 Introduction
Actions to be taken to rectify malfunctions are indicated in the “Rectification” column of the
malfunction lists. Those rectification notes printed on a dark background may only be carried
out by an authorised service centre.
Details of authorised service centres are to be found at the end in the “Contact Addresses”
section.
5.2 Malfunction Lists
Contact an authorised service centre in the event of malfunctions not contained in these
instructions.
Illustr. 14
To Next Page
Loading...
