To Next PageTo Next Page
Need help?Do you have a question about the Heiniger EVO and is the answer not in the manual?
Lists the designation and quantity of individual parts for the shearing plant.
Explains the importance of safety regulations for users and authorized personnel.
Defines hazard, warning, caution, and information symbols used in the manual.
Defines the intended use and explicitly forbids other applications, especially on people or dangerous animals.
Outlines fundamental safety rules for operating and maintaining the shearing plant.
Covers safe practices for connecting the equipment to power outlets and circuit breakers.
Details crucial safety measures to prevent accidents, damage, and injury during operation.
Addresses noise levels and recommends personal protective equipment for user safety.
Highlights hazards not directly related to shearing and requests user feedback on safety issues.
Specifies the necessary experience and knowledge for safe operation of the shearing plant.
Key considerations before operating the plant, including voltage matching and power source.
Describes the three available speed settings and their suitability for different user skill levels.
Provides instructions for authorized personnel on how to safely adjust the machine's speed settings.
Guidance on correctly mounting and connecting the shearing plant for operation.
Specifies the correct installation height and clearance for wall-mounted shearing plants.
Instructions for attaching the drive components to the shearing plant.
Details the procedure for safely powering the shearing plant on and off.
Instructions for safely cleaning the shearing plant using a dry cloth, avoiding liquids.
Recommends an annual inspection and periodic belt checks for optimal functionality and safety.
Provides detailed lubrication guidelines for different parts of the shearing plant to prevent faults.
States that the shearing plant itself requires no lubrication.
Covers lubrication before use, after cutter replacement, and after 100 hours of operation.
Details lubrication of the universal joint cogs every 2 operating hours with mineral oil.
Refers to the separate operating instructions for the shearing handpiece lubrication.
Advises on cleaning and storing the shearing plant in a dry, clean location away from children.
Introduces the troubleshooting guide and advises contacting service for unlisted malfunctions.
A table listing common malfunctions, their causes, and suggested solutions for the shearing plant.
Emphasizes the operator's responsibility for proper disposal according to national regulations.
Lists materials used in the machine and their corresponding part numbers for dismantling purposes.
General| Brand | Heiniger |
|---|---|
| Model | EVO |
| Category | Pet Care Product |
| Language | English |
