Battery flat
Contacts dirty
(Illustration 1, Item 17/24)
Smell of burning from the
motor housing. Motor burned
out
Switch without contact
Battery flat
Wrong type of battery
Clipping tension too high
Blades and clipper head were
inadequately oiled
Flat, not fully charged or faulty
battery being used
Faulty battery
Charge battery
Switch machine off and clean
contacts.
Have motor replaced
Have switch replaced
Charge battery
Only use original batteries
Reduce clipping tension (Illust-
ration 9) and, if necessary, have
blades resharpened
Oil blades and clipper head
(Illustration 7)
Only use intact, fully charged
original batteries
Replace battery
Motor does not run
Motor runs very slowly
Running time of a fully charged
battery ist too short and/or
motor gets hot
Motor Section / Charger / Battery
MALFUNCTION RECTIFICATIONCAUSE
To Next Page
Loading...
