To Next PageTo Next PageWhy is the running time of my Heiniger saphir too short?
If the running time of your fully charged Heiniger Hair Clipper battery is too short, and/or the blades are getting hot, it could be due to insufficient oiling of the clipper blades; ensure you oil them adequately. Also, using a dead, not fully charged, or defective battery can cause this issue. Use only intact and completely charged original batteries.
Why my Heiniger saphir Hair Clipper cuts badly or not at all?
If your Heiniger Hair Clipper is cutting poorly or not at all, several factors could be responsible. The clipper blade may be blunt, requiring resharpening by a service center. Ensure the clipper blades are oiled every 15 minutes. Only clip dry hair. Hairs may be jammed between the top and bottom blades. To resolve this, remove the clipperhead, push the top blade halfway, and clear any lodged hairs. Lastly, the clipperhead may have too little clipping pressure, which requires inspection.
What to do if my Heiniger saphir Hair Clipper motor is not running?
If the Heiniger Hair Clipper motor isn't running, there are several potential causes. First, the battery might be dead, so try charging it. Second, the contacts could be dirty; switch the clipper off and clean them. Third, the battery itself may be faulty, requiring replacement. Finally, a burning smell from the motor housing indicates the motor has burned out and needs replacement, along with the electronics.
What to do if top blade does not move on Heiniger Pet Care Product?
If the top blade of your Heiniger Pet Care Product does not move, it may be because the clipperhead is not well engaged. Ensure that you engage the clipperhead correctly when the motor is running. Alternatively, the turning lever could be defective, requiring replacement.
How to resolve a Heiniger Pet Care Product running time of a fully charged battery that is too short?
If the running time of your fully charged Heiniger Pet Care Product battery is too short, and/or the blades are getting hot, it could be due to insufficient oiling of the clipper blades. Make sure you oil the clipper blades. It may also be due to using a dead, not fully charged, or defective battery. Ensure that you only use an intact and completely charged original battery.
Why is my Heiniger Pet Care Product clipper cutting badly or not at all?
Your Heiniger Pet Care Product clipper might be cutting poorly or not at all due to several reasons. The clipper blade might be blunt, requiring re-sharpening by a service center. Insufficient oiling of the clipper blades, ideally every 15 minutes, can also cause this issue. Ensure you're only clipping dry hair, as wet hair can impede the cutting process. Hairs jammed between the top and bottom blades can also be a culprit; remove the clipperhead, push the top blade half away, and clear any lodged hairs. Finally, the clipperhead might have too little clipping pressure, which requires inspection.
General| Brand | Heiniger |
|---|---|
| Model | saphir |
| Category | Hair Clipper |
| Language | English |
