Location of the remote controller.
Use the remote controller within a distance of 8 meters from the appliance, pointing it
towards the receiver. Reception is confirmed by a beep.
CAUTIONS
The air conditioner will not operate if curtains, doors or other materials block the
signals from the remote controller to the indoor unit.
Prevent any liquid from falling into the remote controller. Do not expose the
remote controller to direct sunlight or heat.
If the infrared signal receiver on the indoor unit is exposed to direct sunlight, the
air conditioner may not function properly. Use curtains to prevent the sunlight
from falling on the receiver.
If other electrical appliances react to the remote controller, either move these
appliances or consult your local dealer.
Do not drop the remote controller. Handle with care.
Do not place heavy objects on the remote controller, or step on it.
Using the remote controller holder(optional)
The remote controller can be attached to a wall or pillar by using a remote controller
holder(not supplied, purchased separately).
Before installing the remote controller, check that the air conditioner receives the signals
properly. Install the remote controller with two screws. For installing or removing the
remote controller, move it up or down in the holder.
VI. HANDLING THE REMOTE CONTROLLER
To Next Page
Loading...
Need help?
General
