This button turns the air conditioner ON and OFF.
MODE Button
Press this button to modify the air conditioner mode in a sequence of following:
NOTE：
Please do not select HEAT mode if the machine you purchased is cooling only
type.
Heat mode is not supported by the cooling only appliance.
FAN Button
Used to select the fan speed in four steps:
NOTE: You can not switch the fan speed in AUTO or DRY mode.
SLEEP Button
Active/Disable sleep function. It can maintain the most comfortable temperature
and save energy. This function is available on COOL, HEAT or AUTO mode only.
For the detail, see sleep operation in USER S MANUAL.
NOTE: While the unit is running under SLEEP mode, it would be cancelled if MODE, FAN
SPEED or ON/OFF button is pressed.
TURBO Button
Active/Disable Turbo function. Turbo function enables the unit to reach the preset
temperature at cooling or heating operation in the shortest time(if the indoor unit does
not support this function, there is no corresponding operation happened when pressing
this button.)
SELF CLEAN Button
Active/Disable Self Clean function
UP Button
Push this button to increase the indoor temperature setting in 1⁰C increments to 30⁰C.
DOWN Button
Push this button to decrease the indoor temperature setting in 1⁰C increments to 17⁰C.
NOTE：Temperature control is not available in Fan mode.
To Next Page
Loading...
Need help?
General
