www.heinner.com 8Kg, 220-240V~50Hz
5
Drying Level - The humidity level obtained after drying can be increased by 3 levels. This way,
level of required dryness can be selected. The levels that can be selected other than the
standard setting: 1, 2, 3. After selection, the LED of the relevant drying level will turn on.
Anti-crease - If you select the "Anti-Crease" option and do not open the door of the dryer at
the end of the programme, the 1-hour anti-crease phase will extend to 2 hours. After selecting
the Anti Crease option, you will hear an audible warning. You can press the same button again
to cancel the option. If you open the door or press the Start/Pause key while the anti-crease
step is in progress, the said step will be cancelled.
Delayed start - You can delay the start time of the programme by selecting the 1-hour to 23-
hour option. You can activate the desired delay time by pressing the Start/Pause button. When
the time is up, the selected programme will start automatically. During the delay time, options
compatible with the programme can be activated/deactivated. Long pressing on Delayed Start
button changes delay time continuously.
Buzzer Cancel - The dryer gives an audible warning when program selection knob is turned,
buttons are pressed and at the end of programme. To cancel the warnings, press and hold the
"Anti-Crease Option" button for 3 seconds. When you press the button, you will hear an
audible warning that the option has been cancelled.
Time drying - When knob is positioned to Time Drying programme, option can be selected by
pressing Time Drying option button and program starts by pressing Start/Pause button. Long
pressing on tme dyring button changes time continuously.
Child lock - There is a child lock option to avoid changes in the programme flow when keys are
pressed during the programme. To activate child lock feature user should press "Delay Start"
and "Anticrease" buttons simultaneously for 3 sec. When the child lock activated, all keys will
be deactivated. Child lock is not automatically deactivated at the end of the program. To
deactivate the child lock at end of the programme, set the programme selection knob to ‘‘Off’’
position. Then set programme selection knob to first position. Child lock is still active. To
deactivate child lock , user should press "Delay Start" and "Anticrease" buttons simultaneously
for 3 sec. When activating/deactivating the child lock, '‘CL’’ will visualize on display for 2 sec
and then becomes off; and an audible warning will be heard. Warning; when the product is
running or the child lock is active, if you turn the programme selection knob, you will hear an
audible warning and ‘‘CL’’ will visualize on display for 2 sec and then becomes off. If you turn
the programme selection knob, you will hear an audible warning. Even if you set the
programme knob to another programme, the previous programme will continue running. To
select a new programme, you need to deactivate the child lock and then set the programme
To Next Page
Loading...
Need help?
General
