www.heinner.com 8Kg, 220-240V~50Hz
9
IMPORTANT: Do not use industrial chemicals to clean your dryer. Do not use a dryer that
has been cleaned with industrial chemicals.
1. Cleaning the lint filter
IMPORTANT: Do not forget to clean the lint filter after each use.
To clean the lint filter:
IX. CLEANING AND MAINTENANCE
1. Open the loading door.
2. Pull up the lint filter to remove it.
3. Use your hands or a soft cloth to clean
the lint.
4. Close and refit the lint filter.
After the dryer has been used for a certain
period of time, if you encounter a layer that
will cause obstruction on the filter surface,
wash the filter with warm water to clean the
layer. Dry the filter thoroughly before
reinstalling it again.
To Next Page
Loading...
Need help?
General
