The manufactures nameplate is located on the rear panel of the unit and contains
electrical and other technical data specific to this unit.
Be sure the unit is properly grounded. To minimize shock and fire hazards, proper
grounding is important.
The power cord is equipped with a three-prong grounding plug for protection
against shock hazards.
Your unit must be used in a properly grounded wall receptacle. If the wall
receptacle you intend to use is not adequately grounded or protected by a time
delay fuse or circuit breaker, have a qualified electrician install the proper
receptacle.
Ensure the receptacle is accessible after the unit installation.
Do not use extension cords or an adapter plugs with this unit. However, if it is
necessary to use an extension cord, use an approved Dehumidifier extension cord
only (available at most local hardware stores).
To avoid the possibility of personal injury, always disconnect the power supply to
the unit, before installing and/or servicing.
To Next Page
Loading...
